GE 1000-1500-2000-3000 VA 사용자 설명서

 

 

 

 

g

 

 

 
 

 

 

 

1  Push the ‘I/TEST’-button (1) and hold 

for 3 seconds until a short beep is 
heard. The bypass LED will shortly light 
up. When the LED ‘On Line’ lights up, 
the UPS is running in ‘ON LINE’ mode. 

 

2  The equipment connected to the UPS 

can now be switched on. 

 
 
 
 
3.2.2  Start-up, utility power not available  
 

 

 

1  Push the ‘I/TEST’-button (1) and hold 

for 3 seconds until a short beep is 
heard. The battery LED and LED ‘On 
Battery’ will light up. The UPS operates 
in ‘ON BATTERY’ mode”: it discharges 
the batteries. 

 
 
 

 
 

 

3.3.1  Normal operation conditions: 
 

•

  the utility power supply is present and within allowable tolerances, 

 

•

  the load does not exceed the nominal rating of the UPS and  

 

•

  the operating temperature is below alarm level 

 

•

  the UPS is on, 

 
 

3.3.2  Normal operation indications: 
 

•

  LEDs ‘Line’, ‘On Line’ and the Load LED 

 

  are on  

 

•

  One or more LEDs on the level bar are on  

 

•

  the buzze r is silent 

 
 
 
 
3.3.3  UPS self-test 
 

Press the ‘I/TEST’-button (1) when the 
UPS is in ‘ON LINE’ mode. The UPS will 
shift to ‘ON BATTERY’ mode and 
automatically perform a self-test for about 
10 seconds (as in fig. 3.5). The self-test 
function will check the condition of the 
battery. After self-test is finished and test is 
O.K, the UPS will return to ‘ON LINE’ 
mode.