American Power Conversion 100 VAC 사용자 설명서

 15 

990-7096 Rev. 2

 

This section describes how to store the UPS while it is not in use.  To remove the UPS from the 
rack, see Removing the UPS from the Rack, page 6.   

Store the UPS covered and flat (rack mount orientation) in a cool, dry location, with its battery 
fully charged.  Disconnect any cables connected to the computer interface port to avoid 
unnecessarily draining the battery  

At -15 to +30 

°C (+5 to +86 °F), charge the UPS’s battery every six months.   

At +30 to +45 

°C (+86  to +113 °F), charge the UPS’s battery every three months. 

 

Please read Chapter 1:  Safety Information, page 1, before replacing the battery tray.  
Once the battery is disconnected, the connected equipment is not protected from power 
outages. 

This UPS has an easy to replace hot-swappable battery tray.  Battery replacement is a safe 
procedure, isolated from electrical hazards.  You may leave the UPS and the protected equipment 
on for the following procedure.  See your dealer or APC (refer to How to Contact APC, page 3) 
for information on replacement battery cartridges. 

SU1400RMJ2U RBC24-J 

 

 

1.  The battery tray is accessible from the front of the UPS. 
2.  Be careful removing the battery tray – it is heavy. 
3.  This procedure requires a Phillips head screwdriver. 
4.  Small sparks at the battery connectors are normal during re-connection.