American Power Conversion 100 VAC 사용자 설명서

990-7096 Rev. 2 

2

 

•  This UPS has an internal energy source (the battery), the output may be energized when the 

unit is not connected to an AC power outlet. 

•  To deenergize the UPS:  first press the Off button to switch the outputs off.  Next disconnect 

the UPS from the AC power outlet, then, disconnect the battery and finally, press the ON 
button to ensure that the internal capacitors are discharged. 

•  The UPS includes a protective earth conductor which carries the leakage current from the load 

devices (computer equipment).  Total leakage current must not exceed 3.5 mA. 

•  Use of this equipment in life support applications where failure of this equipment can 

reasonably be expected to cause the failure of the life support equipment or to significantly 
effect its safety or effectiveness is not recommended. 

•  This equipment contains potentially hazardous voltages.  Do not attempt to disassemble the 

unit.  The only exception is for battery replacement using the procedures below.

  

Except for 

the battery, the unit contains no user serviceable parts.  Repairs are performed only by factory 
trained service personnel.   

•  Do not dispose of batteries in a fire.  The batteries may explode.   
•  Do not open or mutilate batteries.  They contain an electrolyte which is toxic and harmful to 

the skin and eyes. 

•  To avoid personal injury due to energy hazard, remove wrist watches and jewelry such as 

rings when replacing the batteries.  Use tools with insulated handles. 

•  Replace batteries with the same number and type of batteries as originally installed in the 

equipment. 

Return the battery tray to APC using the package in which your replacement tray shipped.  (See 
How to Contact APC, page 3, for details.)  The battery replacement kit includes a new battery 
tray.  See your dealer or Replacing the Battery, page 16, for information on replacement battery 
kits.