Nortel Networks P0607274 0 사용자 설명서
20 Chapter 1 Uninterruptable Power Supply (UPS) Overview
P0607274 02
Operational measurements and accounting
The Business Communications Manager collects operational measurement (OM) information
from the UPS and saves the data in a log file. The OM information is viewed through the Unified
Manager or archlog applications. The OM values can be reset using the Unified Manager. For
further information on how to access logs using the Unified Manager, refer to the Management
User Guide.
from the UPS and saves the data in a log file. The OM information is viewed through the Unified
Manager or archlog applications. The OM values can be reset using the Unified Manager. For
further information on how to access logs using the Unified Manager, refer to the Management
User Guide.
Log files and traces
The BCM UPS service logs into (APC PowerChute.log) to track internal and external UPS service
functionality. The messages described in
functionality. The messages described in
are captured in the log file which can
be viewed through the Unified Manager.
1
Event Log Location (“F:\Program Files\PwerChute\PwrChute.log”, Fixed), this file is
checked periodically by Unified Manager collecting OMs information and UPS overall status.
checked periodically by Unified Manager collecting OMs information and UPS overall status.
2
Data Log Location (“F:\Program Files\PwerChute\PwrChute.dat”, Fixed), this file is checked
periodically by Unified Manager collecting UPS Status Monitor information.
periodically by Unified Manager collecting UPS Status Monitor information.
3
Error Log Location (“F:\Program Files\PwerChute\PwrChute.err”, Fixed), this file is
checked periodically by Unified Manager collecting the UPS failures.
checked periodically by Unified Manager collecting the UPS failures.
UPS default configuration settings
The UPS software is configured under the default settings defined in the following table.
Table 2 UPS default settings
General
Signalling Type
Smart
Port
COM1
Auto UPS Reboot Enabled
Yes
Cable Type
Normal
Event Logging
Event Log Enabled
Yes
Event Log Location
“F:\Program Files\PwerChute\PwrChute.log”
Select the Event Log Maximum
5000 KB
Data Logging
Data Log Enabled
Yes
Data Log Location
“F:\Program Files\PwerChute\PwrChute.dat”
Select the Data Log Maximum
5000 KB
Data Logging interval
60 Seconds
Error Logging