MGE UPS Systems Switched PDU 사용자 설명서

   

3. Operations 

Set FTP Filename 

Specifies the file to be uploaded via FTP 

Set FTP Filepath 

Specifies the filepath for the file to be uploaded 

Set FTP Host 

Sets the FTP Host IP address 

Set FTP Password 

Sets the password for the FTP Host 

Set FTP Username 

Sets the username for the FTP Host 

Set Gateway 

Sets the Gateway 

Set Infeed Name 

Specifies a descriptive field for the infeed 

Set Ipaddress 

Sets the IP address 

Set Location  

Specifies a descriptive field for the HTML control screen and login banner 

Set Outlet Name 

Specifies a descriptive field for a device attached to an outlet 

Set Outlet Wakeup 

Sets the wakeup state for an outlet 

Set Subnet Mask 

Sets the Subnet Mask 

 

Set Telnet Port 

Sets the Telnet server port number 

Set Telnet 

Enables or disables Telnet access 

Set Tower Name 

Specifies a descriptive field for the Switched PDU 

Set User Access 

Sets the access level for a user 

Set User Envmon 

Grants or removes privileges to view input and environmental monitoring status 

Set User Password  

Changes the password for a user 

Set Port Name 

Specifies a descriptive field for a serial port 

Set Port Dsrchk 

Sets the DSR active signal checking for a serial port 

Set Port Speed 

Set the connection speed for all serial ports 

Show FTP 

Displays FTP configuration information 

Show Infeeds 

Displays infeed configuration information 

Show Network 

Display network configuration information 

Show Outlets 

Displays configuration information for all outlets 

Show Ports 

Displays serial port configuration information 

Show System 

Displays system configuration information 

Show Towers 

Displays tower configuration information 

Version 

Displays the Switched PDU firmware version 

At the command prompt, press 

.  A list of valid commands for the current user appears. 

301-0399-4 Rev A. - Page 23