Yamaha RX-V670 사용자 설명서
21
Adjustment of the REAR LEVEL
Adjustment of the FRONT EFFECT LEVEL
If desired, you can adjust the effect sound output level of the
front speakers with this control. The output level is preset to be
80. However, you can adjust the level between 1 and 100.
front speakers with this control. The output level is preset to be
80. However, you can adjust the level between 1 and 100.
●
If the digital sound field program is in the DOLBY PRO
LOGIC mode, the FRONT EFFECT LEVEL control does not
function.
LOGIC mode, the FRONT EFFECT LEVEL control does not
function.
●
Once the output level is adjusted, the level value will be the
same in all the digital sound field programs except for the
DOLBY PRO LOGIC .
same in all the digital sound field programs except for the
DOLBY PRO LOGIC .
●
If a digital sound field program is not used, the FRONT
EFFECT LEVEL control does not function.
EFFECT LEVEL control does not function.
If desired, you can adjust the sound output level of the center
speaker with this control even if the output level is already set
in “Speaker balance adjustment” on page 10.
speaker with this control even if the output level is already set
in “Speaker balance adjustment” on page 10.
●
By continuously pressing “+” or “–” on the CENTER LEVEL
control, the level value changes continuously. However, the
value stops changing momentarily at the point which was
once set in the “test” mode.
control, the level value changes continuously. However, the
value stops changing momentarily at the point which was
once set in the “test” mode.
●
If the digital sound field program is in the CONCERT
VIDEO, MONO MOVIE, ROCK CONCERT or CONCERT
HALL mode, the CENTER LEVEL control can not function.
VIDEO, MONO MOVIE, ROCK CONCERT or CONCERT
HALL mode, the CENTER LEVEL control can not function.
●
Once the output level is adjusted, the level value will be the
same in the DOLBY PRO LOGIC and ENHANCED modes.
same in the DOLBY PRO LOGIC and ENHANCED modes.
●
If a digital sound field program is not used, the CENTER
LEVEL control does not function.
LEVEL control does not function.
Adjustment of the CENTER LEVEL
If desired, you can adjust the sound output level of the rear
speakers with this control even if the output level is already set
in “Speaker balance adjustment” on page 10.
speakers with this control even if the output level is already set
in “Speaker balance adjustment” on page 10.
●
By continuously pressing “+” or “–” on the REAR LEVEL
control, the level value changes continuously. However, the
value stops changing momentarily at the point which was
once set in the “test” mode.
control, the level value changes continuously. However, the
value stops changing momentarily at the point which was
once set in the “test” mode.
●
Once the output level is adjusted, the level value will be the
same in all the digital sound field programs.
same in all the digital sound field programs.
●
If a digital sound field program is not used, the REAR
LEVEL control does not function.
LEVEL control does not function.
Note
The values of the DELAY TIME, the FRONT EFFECT LEVEL,
CENTER LEVEL, and REAR LEVEL you set the last time will
remain memorized even when the power of this unit is off.
However, if the power plug cord is kept disconnected for more
than one week, these values will be invalid.
The values of the DELAY TIME, the FRONT EFFECT LEVEL,
CENTER LEVEL, and REAR LEVEL you set the last time will
remain memorized even when the power of this unit is off.
However, if the power plug cord is kept disconnected for more
than one week, these values will be invalid.
FRONT EFFECT LEVEL
F
CENTER LEVEL
C
REAR LEVEL
R
Adjustable
Illuminates
Adjustable
Illuminates
Adjustable
Illuminates