Powerware ST-2400S 사용자 설명서
When the horsepower computer is used with a companion personal
computer, a standard (9 pin) RS-232-C extension cable is used to connect
the two computers together. This extension cable is normally 10 feet long,
but can be up to 50 feet long (and even longer if special “long range” RS-
232-C extension cables are used). The print rate and manual print
switches serve to notify the personal computer which measurements are to
be saved (or printed) in much the same way they are used when a printer is
attached to the horsepower computer.
Software for the 2400S horsepower computer:
There are several software programs for the 2400S horsepower computer. These
include:
include:
Calibration Setup Software for the 2400S:
HpcOptionsW32 is software for the 2400S horsepower computer
which is used to prepare the 2400S for calibration. This is done so
that the 2400S will “know” the details of the method you will use
to check the torque calibration of the unit. This “factory setup” is
normally performed on the 2400S by your dealer prior to delivery
of the 2400S to you so won’t have to.
If you change your calibration method or calibration tools, this
program can be used to inform the 2400S of the changes so that
subsequent torque calibrations will be accurate.
If you use a NIST traceable calibration method, this program must
be used periodically (each time the load cell and the 2000S
horsepower computer are sent in to have their NIST calibrations
checked) to inform the 2400S of any changes to the load cell
calibration or the internal 2400S traceable shunt resistor
calibration.
HpcOptionsW32 is compatible with most Windows based
computer systems including Win95, Win98, WinMe, Win2000 and
WinXP.
which is used to prepare the 2400S for calibration. This is done so
that the 2400S will “know” the details of the method you will use
to check the torque calibration of the unit. This “factory setup” is
normally performed on the 2400S by your dealer prior to delivery
of the 2400S to you so won’t have to.
If you change your calibration method or calibration tools, this
program can be used to inform the 2400S of the changes so that
subsequent torque calibrations will be accurate.
If you use a NIST traceable calibration method, this program must
be used periodically (each time the load cell and the 2000S
horsepower computer are sent in to have their NIST calibrations
checked) to inform the 2400S of any changes to the load cell
calibration or the internal 2400S traceable shunt resistor
calibration.
HpcOptionsW32 is compatible with most Windows based
computer systems including Win95, Win98, WinMe, Win2000 and
WinXP.
Data Recording Software for the 2400S (Dyno32):
The Dyno32 software makes it easy to reproduce the 2400S
horsepower displays on the screen of the personal computer for
remote viewing, etc. There are also features for printing and
recording (saving) your dyno measurements. Data printing and
horsepower displays on the screen of the personal computer for
remote viewing, etc. There are also features for printing and
recording (saving) your dyno measurements. Data printing and
9