Panasonic PT-AE2000U 사용자 설명서

You can adjust the white balance of the projected image.

 

Setting range: -6 to +6

You can switch automatic adjustment of the lamp and 
the lens iris on/off.

 

ON:

Automatic adjustment

 

OFF:

No adjustment

You can monitor whether or not the luminance level of 
the input signal is in the recommended range by 
displaying it in the waveform monitor. If the waveform is 
not in the range, adjust it for the best quality. See 
“Adjusting the signal condition with a waveform” on 
page 24.

1. Press F G to move to the required waveform 

style.

2. Press ENTER to select.

 

The WAVEFORM MONITOR will be displayed.

 

J

When the FULL SCAN is selected, press F G I 
H to adjust the position of the monitor.

 

J

You can switch on/off the automatic adjustment 
system in each items.

1. Press F G and select the required item.
2. Press I H and switch on/off.
3. Press F G and select AUTO and press ENTER.

 

The confirmation screen will be displayed.

4. Press I H and select OK.
5. Press ENTER.

You can perform image adjustment in some PICTURE 
menu items while displaying a certain area of the frozen 
image in a split window.

Q

Select the required split style from NORMAL and 
REVERSE in the SPLIT ADJUST MODE menu.

 

 

OFF

FULL SCAN(Y)

FULL SCAN(R)

FULL SCAN(G)

FULL SCAN(B)

SINGLE LINE SCAN(Y)

SINGLE LINE SCAN(R)

SINGLE LINE SCAN(G)

SINGLE LINE SCAN(B)

MONITOR POSITION

UPPER LEFT

AUTO ADJUST

• When the WAVEFORM MONITOR is set to OFF, the 

AUTO ADJUST is not displayed.