NEC NP-M352WS 사용자 설명서

•  Consult with your network administrator about these settings.
•  When using a wireless LAN connection, attach the optional USB Wireless LAN to the projector. (

→ page

)

[PROFILE]

[DISABLE]

Wireless LAN connection will be turned off

[EASY CONNECTION]

Select [EASY CONNECTION] to execute a wireless LAN
easily  using  Image  Express  Utility  Lite  on  the  supplied
NEC Projector CD-ROM.

[SIMPLE ACCESS
POINT]

Set the projector for simple access point.

Selecting [SIMPLE ACCESS POINT] will allow the projec-

tor to create an infrastructure network. The IP address of

the projector will be set automatically.

Select "Obtain an IP Address Automatically" to set the IP

address of a connected computer.

It takes a few seconds for a change of your computer's IP

address to come into effect in Windows 7/Windows Vista

while it takes one or two minutes in Window XP.

When you connect with your computer to save your profile

and select "Automatically connect when within range" from

the Properties tab of Wireless Network in Windows for your

selected profile, your wireless LAN will be accessed under

the following conditions:

•  at the time of turning on the computer or the projec-

tor

•  when  the  notebook  type  is  within  the  range  of  the

projector's wireless LAN can be achieved.

Data transmission between wireless LAN and wired LAN

is not possible.

When  the  [SIMPLE  ACCESS  POINT]  mode  is  used  to

send images, it is recommended to connect to only one

computer.

[PROFILE 1]

Up to two settings for the USB wireless LAN unit can be
stored in memory of the projector. (

→ page

To recall the settings from memory, select [PROFILE 1] or
[PROFILE 2] from [PROFILE].

[PROFILE 2]

[RECONNECT]

Retry to connect the projector to a network. Try this if you have changed [PROFILE].