NEC NP-M352WS 사용자 설명서

다운로드
페이지 156
114
6. Installation and Connections
3
2
1
This section describes how to set up your projector and how to connect video and audio sources.
Your projector is simple to set up and use. But before you get started, you must first:
①  Set up a screen and the projector.
②  Connect your computer or video equip-
ment to the projector.
(
→  page
)
③  Connect  the  supplied  power  cord. 
(
→ page
)
NOTE: Ensure that the power cord and any other
cables are disconnected before moving the pro-
jector. When moving the projector or when it is
not in use, cover the lens with the sliding lens
cover.
 Setting Up the Screen and the Projector
Selecting a Location
[M332XS]
The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is ap-
proximately 60" (1.52 m) measured diagonally when the projector is roughly 27 inches (0.68 m) from the wall or screen.
The largest the image can be is 150" (3.8 m) when the projector is about 69 inches (1.8 m) from the wall or screen.
150"
120"
Distance 
(Unit:
 m/inch)
Lens center
Screen Size
1.4/55"
1.8/69.2"
1.2/45.5"
0.9/36"
0.7/26.6"
203.2(W)�152.4(H) / 80(W)�60(H)
162.6(W)�121.9(H) / 64(W)�48(H)
121.9(W)�91.4(H) / 48(W)�36(H)
Screen Size (Unit: cm/inch)
304.8(W)�228.6(H) / 120(W)�90(H)
243.8(W)�182.9(H) / 96(W)�72(H)
100"
80"
60"
TIP:
•  Digital Zoom can result in a blurry image due to the electronic zoom.
•  For more details on throw distance, see page
To the wall outlet.