NEC WT615 사용자 설명서

This section helps you resolve problems you may encounter while setting up or using the projector.

Off

Blinking light

Steady light

Green

Orange

Green

Orange

0.5 sec On,

0.5 sec Off

2.5 sec On,

0.5 sec Off

0.5 sec On,

0.5 sec Off

The main power is off

The projector is getting ready to turn on.

Off Timer is activated.

The projector is cooling down.

The projector is turned on.

The projector is in Normal standby or

Power-saving standby mode.

–

Wait for a moment.

–

Wait for a moment.

–

–

Off

Blinking light

Steady light

Red

Green

Orange

Orange

Red
Green

1 cycle (0.5 sec On,

2.5 sec Off)

2 cycle (0.5 sec On,

0.5 sec Of)

3 cycle (0.5 sec On,

0.5 sec Off)

4 cycle (0.5 sec On,

0.5 sec Off)

6 cycle (0.5 sec On,

0.5 sec Off)

1 cycle(0.5 sec On,

2.5 sec Off)

Normal
Lamp cover error

Temperature error

Temperature error due to dust

Power error

Fan error

Lamp error

Re-firing the lamp (The projector is cool-
ing down.)
Network conflict

Cabinet button is locked

A hand or an object blocks the light path.
The projector is in Normal standby mode.

–
Replace the lamp cover correctly.
(Page 

The projector is overheated. Move
the projector to a cooler location.
Remove dust in the light path.

Power unit will not work correctly.

Fans will not work correctly.

Lamp fails to light. Wait a full
minute and then turn on again.
The projector is re-firing. Wait for a
moment.
Network will not work correctly.

You have pressed cabinet button
when Cabinet Button is locked.
(Page 

Remove it from the light path.
–

Off

Blinking light

Steady light

Normal

Lamp has reached its end of life. Lamp

replacement message will be displayed.

Lamp has been used beyond its limit. The

projector will not turn on until the lamp is

replaced.

Lamp mode is set to Eco mode

Red

Red

Green

–

Replace the lamp.

Replace the lamp.

–