Hoshizaki FD-1001MAH(-C) 사용자 설명서

36

CHOKING HAZARD: Ensure all components, fasteners, and thumbscrews are 
securely in place after any cleaning or maintenance is done to the unit. Make 
sure that none have fallen into the dispenser unit/storage bin.

Hoshizaki recommends cleaning and sanitizing this unit at least twice a year. More 
frequent cleaning and sanitizing, however, may be required in some existing water 
conditions.

1. To prevent injury to individuals and damage to the icemaker, do not use 

ammonia type cleaners.

. Carefully follow any instructions provided with the bottles of cleaning and 

sanitizing solution.

3. Always wear liquid-proof gloves and goggles to prevent the cleaning and 

sanitizing solutions from coming into contact with skin or eyes.

4. After cleaning and sanitizing, do not use ice made from the cleaning and 

sanitizing solutions. Be careful not to leave any solution on the parts or in the 
dispenser unit/storage bin.

For safety and maximum effectiveness, use the solution immediately after 
dilution.

Dilute 9.6 fl. oz. (0.9 l) of recommended cleaner, Hoshizaki "Scale Away" or 
"LIME-A-WAY" (Economics Laboratory, Inc.), with 1.6 gal. (6.0 l) of warm water.

1) Turn off the power supply, then remove the front panel. Make sure the power switch is 

in the "ON" position, then move the control switch to the "DRAIN" position. Replace the 
front panel in its correct position.

) Close the water supply line shut-off valve.
3) Turn on the power supply and allow the water system to drain for 5 minutes.
4) Turn off the power supply, then remove the front and top panels. Move the power 

switch to the "OFF" position.

5) Remove all of the ice from the dispenser unit/storage bin.