TP-LINK TD-8816 사용자 설명서

 

22 

or given by your ISP. For Static IP, you need to specify the IP address, Subnet Mask and 
Gateway IP address. 

¾

  Dual Stack Line: Enable the Dual Stack Lite( D-S Lite ) function if you need. It is disabled by 

default. 

If you select this type of connection, the modem router can be configured to act as a bridging 

device between your LAN and your ISP. Bridges are devices that enable two or more networks to 

communicate as if they are two segments of the same physical LAN.   

¾

  Dual Stack Lite: Enable the Dual Stack Lite ( D-S Lite ) function if you need. It is disabled by 

default. 

 

Figure 4-10 

)

After you finish the Internet configuration, please click SAVE to make the settings take effect. 

There are two IP versions: IPv4 and IPv6. If you select IPv6 as IP version, please follow the 

configuration below to configure the parameters for WAN ports. 

¾

  Encapsulation:  There are four connection types: Dynamic IP Address, Static IP Address, 

PPPoA/PPPoE and Bridge Mode. Please choose the designed type that you want to use. 
After that, you should follow the configuration below to proceed. 

Select this option if your ISP provides you an IP address automatically. This option is typically 

used for Cable services. Please enter the Dynamic IP information accordingly.