Cabletron Systems T1 사용자 설명서

This chapter details set up and installation of the WPIM-T1/DDS into a 
host platform.

For additional support related to the WPIM-T1/DDS, refer to the host 
platform manual into which the WPIM-T1/DDS is being installed. Locate 
the guide by clicking on the Cabletron Systems QuickSET program group 
icon after installing the QuickSET CD on your computer, or see 

 in the 

Carefully remove the WPIM-T1/DDS from the shipping box.

Visually inspect the WPIM-T1/DDS. If there are any signs of damage, 
contact Cabletron Systems immediately. Refer to 

.

Only qualified personnel should install the WPIM-T1/DDS. This 
User’s Guide is intended for the experienced network 
equipment installer.

QuickSET or Local Management must be used to set up the 
WPIM-T1/DDS in management before any connections are 
made to the WAN. Follow the directions carefully.

Some WPIMs require version 1.02 or greater of QuickSET to 
participate and function correctly in your network. Contact 
Cabletron Systems to obtain the latest version of QuickSET if 
you do not have it. Refer to 

 

for 

more information.

Both the WPIM-T1/DDS and the host platform in which the 
WPIM-T1/DDS is installed are static sensitive devices. Use a 
grounding strap and follow all static-safe precautions during 
installation. Failure to do so could result in damage to the 
WPIM-T1/DDS and the host platform receiving it.