Cabletron Systems T1 사용자 설명서

The line configuration information shown in 

 must be supplied 

by the service provider.

Begin the WPIM-T1/DDS physical configuration by accessing the WAN 
Physical Configuration screen through Local Management (

).

Proceed with the following steps:

Use the arrow keys to highlight the WPIM X field at the bottom of the 
screen. Press the SPACE bar to select the number of the WPIM being 
configured, then press ENTER.

Use the arrow keys to highlight MgrType. Select PPP.

Use the arrow keys to highlight Timeslot View. Press the SPACE bar 
to select New, then press ENTER. The cursor moves to Timeslot #1 of 
the Timeslot Configuration Table.

Insert an interface number (refer to Note below) into every Timeslot 
being used (in the example shown back in 

used, the rest have zeros in them). Type the number, press ENTER, 
then use the arrow keys to highlight the next Timeslot field. Exit this 
field by using the arrow keys.The cursor automatically moves to the 
T1 Line Coding field.

Line Coding

B8ZS or AMI

Frame Type

ESF or D4

Clock Source

Loop Timing or Local Timing

DS-0s (Timeslots)

Timeslots being used for each end of 
the circuit

When changing from one protocol to another on a 
WPIM-T1/DDS that has been operational, save NONE as the 
protocol before changing to another protocol.