Cabletron Systems T1 사용자 설명서

This section describes the features of the WAN Interface Configuration 
screen. Access the screen by using the arrow keys to highlight the WAN 
INT CONFIG command field at the bottom of the WAN Physical 
Configuration screen, then press ENTER. The WAN Interface 
Configuration screen shown in 

 displays.

The following sections describe WAN Interface Configuration screen 
fields.

Interface Number (Modifiable)

Displays the active Interface Number. Use this field to configure the 
Interface Number assigned to the timeslots on the WAN Physical 
Configuration screen.

Max Xmit Unit (Modifiable)

User configured field that displays the maximum packet size that can be 
transmitted on the selected interface. The default settings for this field 
(1526 for PPP and 4095 for Frame Relay) depend on the Protocol 
Manager selected. 

WAN INTERFACE CONFIGURATION

Interface Number:     000
Max Xmit Unit:                0
ProtMgrIface:             [0]
Active Protocol:         FR
    FR LMI:

             [ANSI_94]

        DLCI Address:         0
        DLCI DCP En:
        DLCI DCP Stat:
        Comp Ratio:
        Circuit State:     [Invalid]

2750_02

<host name> Local Management

Flash Image Version: xx.xx.xx

001
002
003
004
005
006
007
008
009
010
011
012
013
014
015

CKT# IF# LID

STATE

018
019
020
021
022
023
024
025
026
027
028
029
030
031
032

CKT# IF# LID STATE

016

017

001 Enet

UP

002

Enet

DOWN

PORTS:
[1-32]