Cabletron Systems T1 사용자 설명서

Chapter 4: Local Management for DDS Service

SAVE (Command)

Saves the configuration changes.

PORTS: [1-32] (Command)

Interface table displays the range of circuits shown in the command field. 
Use the SPACE bar and either the BACKSPACE or DELETE key to step 
through the displays.

RETURN (Command)

Returns user to the previous screen.

CKT# (Read-Only)

Displays the circuit number of the application ports available from the 
host platform. If the active protocol is PPP or FR PtoP, only one 
application port per interface number (IF#) is assigned. If the active 
protocol is FR PtoMP, the available WAN ports from the host platform 
may be assigned, one per DLCI.

IF# (Read-Only)

Displays the MIB II Interface number that is associated with the 
application port (CKT#).

LID (Read-Only)

Displays the Link Identifier. If the active protocol is Frame Relay, the 
Data Link Connection Identifier is displayed. If the active protocol for 
this interface is PPP, then PPP displays in this field. For Ethernet ports, 
Enet is displayed.

STATE (Read-Only)

Displays the status of the application port. If the active protocol is Frame 
Relay, this field displays the status as Active, Inactive, or Invalid 
(no LMI). If the active protocol is PPP or Ethernet, this field displays UP 
(active) or DOWN (inactive).