Cabletron Systems STH-22 사용자 설명서

Page 3-2

STH hubs are star-wired to the intelligent hub. To add STH hubs to a 
stack, refer to Figure 3-1 and perform the following steps:

1.

Attach an STH HubSTACK Interconnect cable to the "STACK" port on 
the rear panel of an STH.

2.

Attach the other end of the cable to one of the numbered STACK ports 
on the back panel of the intelligent hub. 

The port’s number determines the relative position of the STH hub in 
the network’s ring sequence and is used by the intelligent hub’s 
management system to identify the STH to the user.

3.

Repeat steps 1 and 2 to attach up to four STH hubs in the stack.

Figure 3-1. Stacking the STH

To disconnect an STH hub from the stack, simply unplug its HubSTACK 
Interconnect cable from the intelligent hub.

STH-24

STH-24

STH-24

STH-24