Cabletron Systems DLE32-MA 사용자 설명서
RMON Statistics Screen
DLE22-MA,DLE32-MA,DLE23-MA and DLE33-MA User’s Guide
5-95
Interface [XX] (Command)
This command is used to enter an interface number for viewing statistics.
For instructions on how to use this command, refer to Section 5.29.1.
For instructions on how to use this command, refer to Section 5.29.1.
CLEAR COUNTERS (Command)
This command is used to reset all statistic counters to zero. For details on
how to use this field, refer to Section 5.29.2.
how to use this field, refer to Section 5.29.2.
5.29.1
Displaying Interface Statistics
To display the statistics for any interface, proceed as follows:
1.
Use the arrow keys to highlight the Interface [XX] field at the bottom
of the screen.
of the screen.
2.
Press the SPACE bar to increment (or press the DEL (delete) key to
decrement) the interface number.
decrement) the interface number.
3.
Press ENTER (neither the Interface # fields nor the statistics will
change until ENTER is pressed).
change until ENTER is pressed).
5.29.2
Using the Clear Counters Command
To reset all the statistics counters of the selected interface to zero, perform
the following steps:
the following steps:
1.
Use the arrow keys to highlight the CLEAR COUNTERS command.
2.
Press ENTER, the counters for the selected interface are reset to zero.
5.30
RMON STATISTICS SCREEN
RMON statistics for each interface, on a interface-by-interface basis, are
viewed through the RMON Statistics screen shown in Figure 5-35.
viewed through the RMON Statistics screen shown in Figure 5-35.
Access the RMON Statistics screen by using the arrow keys to highlight
the RMON STATISTICS menu item on the Module Statistics Menu
screen and pressing ENTER. The RMON Statistics screen displays.
the RMON STATISTICS menu item on the Module Statistics Menu
screen and pressing ENTER. The RMON Statistics screen displays.