Cabletron Systems HSIM-W87 사용자 설명서

다운로드
페이지 56
 
Chapter 1: 
 
Introduction
 
1-4
HSIM-W87 User’s Guide
 
1.3
DATA FLOW IN THE HSIM-W87
 
The T3 port receives the DS3 data through the coaxial interface. A T3 
framer/Multiplexer strips off the T3 framing and provides 28 individual 
T1 data streams. The T1 data streams are then terminated by T1 framers, 
which provide an HDLC bit stream to the HDLC controller. The 
controller receives data packets from each of the bit streams and places 
them in a memory subsystem. An onboard CPU examines the packet and 
notifies the host of its arrival. Finally, a Cabletron proprietary ASIC 
transfers the data to the host platform. 
This process is followed in reverse when a packet is transmitted from the 
host platform out the T3 port. The host platform notifies the HSIM-W87 
when a packet is coming and transfers the packet to the memory. The 
HDLC format is applied to the data; then the data is framed to a T1 
format, and passed to the framer/ Multiplexer. The T1 data is multiplexed 
with other T1 streams and is transmitted out through the T3 interface. 
 
1.4
FEATURES
 
Data Transfer Rates of 45 Mbps in full duplex, when running all 28 
T1s carrying continuous data traffic of 128-byte packets or larger.
High-level Data Link Control (HDLC) protocol
T1 Inverse Multiplexing (IMUX)
WAN IP Priority Queuing functionality
DS1 Alarm Thresholds
SNMP support
DS1 and DS3 MIB Support
LANVIEW LEDs
 
1.4.1
Connectivity
 
The HSIM-W87 module supports WAN technology using a DS3 
interface, and supports 28 live full duplex T1 connections. The 
HSIM-W87 channelizes the T3 down to the DS1 level. The HSIM-W87 
has an integrated M13 MUX.