Cabletron Systems 7C04 사용자 설명서

Disabling an Alarm

3-9

Basic Alarm Configuration

To configure additional alarms, or alarms of a different type, select the 
appropriate alarm variable at the top of the window, highlight the appropriate 
interface(s), and repeat the procedures outlined above.

Using the 

 button at the bottom of the window actually performs two 

functions: it both disables the alarm and deletes the alarm entry (and its 
associated event and action entries) from device memory to help conserve device 
resources. In the list box display, any “disabled” alarm automatically resets to the 
default parameters: status disabled, log yes, trap no, rising and falling thresholds 
zero, and no action.

To disable an alarm:

1.

In the top of the window, click to select the variable for which you wish to 
disable an alarm: In Octets Kb, Total Errors, or Broadcast/Multicast.

2.

In the list box display, click to highlight the interface(s) for which you wish to 
disable the selected alarm type. Remember, the editable fields in the lower 
portion of the window will display the alarm parameters for the selected 
interface with the lowest index number, but the selected alarm type will be 
disabled for all selected interfaces.

3.

Click on 

. The selected alarm type on the selected interface(s) will 

be disabled, and the list box display will refresh to reflect those changes.