Cabletron Systems 9H42X-XX 사용자 설명서

The 9H42x-xx Module View

2-26

Managing the Module

2.

Enter the new time in a 24-hour hh:mm:ss format, either by highlighting the 
field you wish to change and using the up and down arrow buttons, or by 
simply entering the new value in the appropriate field.

3.

Click on 

 to save the changes, or on 

 to exit without changes.

To edit the device date:

1.

Click on Device on the Module View window menu bar to access the Device 
menu, drag down to Edit Device Date..., and release. The following change 
window, 

, will appear.

Figure 2-11. Edit Date Window

2.

Enter the new date in a mm/dd/yy format, either by highlighting the field you 
wish to change and using the up and down arrow buttons, or by simply 
entering the new value in the appropriate field.

3.

Click on 

 to save the changes, or on 

 to exit without changes.

When you disable bridging at a port interface, you disconnect that port’s network 
from the bridge entirely. The port does not forward any packets, nor does it 
participate in Spanning Tree operations. Nodes connected to the network can still 
communicate with each other, but they can’t communicate with the bridge or 
with other networks connected to the bridge. When you enable bridging for the 
interface, the port moves from the Disabled state through the Listening and 
Learning states to the Forwarding state; bridge port state color codes will change 
accordingly.