Cabletron Systems SEHI-22FL 사용자 가이드

This appendix provides instructions for setting up a TFTP server and to 
download an image file to the SEHI by setting specific MIB OID strings. 
Set the OID strings with the SNMP Tools screen described in Chapter 7, 
Section 7.8.

The SEHI supports the Standard TFTP Download application. In this 
application the SEHI automatically goes offline during the image 
download. After the download, the SEHI programs FLASH, then reboots 
with the new image.

Before downloading the image to the SEHI, you must complete the 
following steps:

1. Decompress the image file on a DOS PC using the PKUNZIP utility 

included with the image.

2. Load the decompressed image file onto the TFTP server.

Download an image file to the SEHI with a remote 
management package such as SPECTRUM, SPECTRUM 
Element Manager, or the appropriate SPECTRUM Portable 
Management Application. Refer to the specific package 
documentation for image file download procedures.

The PKUNZIP utility requires a DOS PC. You must 
decompress the image file on the DOS PC before you load the 
image file onto the TFTP server.

For information on how to set up a workstation as a TFTP 
server, refer to your specific workstation documentation. These 
instructions include limited information and guidelines for 
setting up a UNIX workstation to work as a TFTP server.

SEHI Book  Page 1  Friday, April 19, 1996  10:46 AM