Cabletron Systems ZX-250 사용자 설명서

3-4   SmartCell ZX-250 User Guide

Creating an Emulated LAN

  IP Over ATM and LANE

s•

Enter the 

 command to activate LANE server services on this switch.

SmartCell ZX # start lecs

NOTICE - 'LECS' ***** LECS started *****

SmartCell ZX #

¢•

Create an ELAN on your SmartCell ZX-250 switch by executing the

 command. The 

following is an example.

SmartCell ZX # add elan

ELANNumber(0) : 1

  

<1 is used instead of the default, (0)

ELANName(ELAN001): Marketing 

 <ELAN is named Marketing instead of the default, (ELAN000)

ConnectMethod(SVC):

ELANType(802.3)  

 

<The default (Ethernet) is used

Multipoint(YES) :

MTU(1516) :

Distribute(PROXY) :

SmartCell ZX # 

••

Create a client for the switch on the ELAN. For example, enter

SmartCell ZX # add laneclient

ClientNumber(0) :1

<One is used instead of the default, (0)

LanName(ELAN001) : Marketing  

< ELAN name is Marketing, not the default, (ELAN001)

ServerType(LECS) :

ServerAddress() 

<No LANE server address is specified; see note below

IPAddress() : 90.1.1.1 

< IP address and subnet mask are included only as examples 

NetMask(255.0.0.0): 255.255.255.0

MTU(1516) :

SmartCell ZX # 

2p›F

The command 

 always prompts you with a subnet mask that is 

appropriate for the IP address. However, if necessary, you can change the subnet 
mask to correspond to the strategy employed within your networks.

2p›F

When you create a client, it automatically finds the LECS address using ILMI.

As the local client joins the ELAN, the following messages are sent to the Event log:

NOTICE - 'ZLESSRV'  LES Join 39:00:00:00:00:00:00:00:00:00:14:41:80:00:20:D4:

14:41:82:00

NOTICE - 'ZLESSRV'  BUS Connect 39:00:00:00:00:00:00:00:00:00:14:41:80:00:20:D4:

14:41:82:00

%"¤›apm

Never create an ELAN (or ELAN client) with the same subnet as the SmartCell 
ZX-250 Ethernet port.