Cabletron Systems ZX-250 사용자 설명서
4-40 SmartCell ZX-250 User Guide
Performing Hardware Maintenance
Switch Administration
Figure 4-12 Complete seating of card with lever arms.
4.9.10
Upgrading Main Switch Module (MSM-16 to MSM-32)
To upgrade the MSM-16 to a MSM-32, you must order the MSM-32 from Cabletron Systems. Then, follow the
procedures for removing the switch module and replace the current MSM-16 with the new MSM-32. See instructions
at the beginning of this section.
procedures for removing the switch module and replace the current MSM-16 with the new MSM-32. See instructions
at the beginning of this section.
4.9.11
Adding an Expansion Switch Module
Follow the instructions for replacing a switch module, with the following additional instructions:
s•
Remove blank filler panels after removing the front bezel.
¢•
Install new ESM complete with I/O modules as shipped.
4.9.12
Adding New I/O Modules
Follow the instructions for removing and replacing switch and I/O modules, removing blank filler panel after removing
the appropriate switch module.
the appropriate switch module.