Cabletron Systems 2208 사용자 설명서

COMMIT TO FLASH.” displays in the event message line at the top 
of the screen and the new image is downloaded into FLASH memory.

, allows you to set each 

interface as a source or destination interface on the 2H22-08R. An 
interface can be set to have one or more destination interfaces. For 
example, interface 1 can be set as a source interface with three 
destinations, interfaces 2, 3, and 4. Traffic from interface 1 is then 
automatically redirected to interfaces 2, 3, and 4. Interface 1 can also 
serve as a destination interface for other ports.

The port redirect function is extremely useful for troubleshooting 
purposes, as it enables traffic to be sent to a particular interface(s) where, 
with the use of an analyzer or RMON probe, all current traffic from the 
source interface(s) can be examined.

The Port Redirect Function screen is only used if the 
operational mode of the device has been set to 802.1d 
SWITCHING. Refer to 

 for instructions on configuring the device to operate in 

this mode.

Although all traffic from the source port (including, if desired, 
error frames) is sent to the destination port, normal switching is 
still performed for all frames on the source port.