Cabletron Systems 2208 사용자 설명서

Upon power up, the COM port is configured to the default settings of 
ENABLED and LM.

To configure the COM port, you must enable/disable the COM port and 
select an application.

The 2H22-08R COM port supports the following applications:

Local Management connections

American Power Conversion Uninterruptible Power Supply (UPS) 
connections

Use the arrow keys to highlight the Com field.

Upon saving the new Operational Mode, the module reboots.

If the 2H22-08R has been set to 802.1Q SWITCHING, refer to 
your Port Based VLAN User’s Guide to configure the devices 
for this type of operation.

If the 2H22-08R has been set to SECURE FAST VLAN, refer to 
your SecureFast documentation set to configure the devices for 
this type of operation.

Before altering the COM port settings, read this entire COM 
port configuration section. Altering the COM port settings 
disconnects the Local Management terminal from the port, and 
ends the Local Management session.