Cabletron Systems 6H129-08 사용자 설명서

The Port Redirect Function screen, 

 allows the user to set each 

one of the ports on the 6H12X-08 as a source or destination port. A port 
can be set to have one or more destination ports. For example, port 1 can 
be set as a source port with three destinations, ports 2, 3, and 4. Traffic 
from port 1 is then automatically redirected to ports 2, 3, and 4. Port 1 can 
also serve as a destination port for other ports. The port redirect function 
is extremely useful for troubleshooting purposes, as it allows traffic to be 
sent to a particular port(s) where, with the use of an analyzer or RMON 
probe, all current traffic from the source port(s) can be examined.

To access the Port Redirect Function screen from the Module Specific 
Configuration screen, use the arrow keys to highlight the PORT 
REDIRECT FUNCTION menu item and press ENTER. The Port 
Redirect Function

 screen displays.

The Port Redirect Function screen may not be available 
depending on the operational mode that has been set for the 
module. Refer to the Release Notes to see what operational 
modes support the Port Redirect Function. Refer to 

 for instructions on configuring the operational 

mode of the module.

Although all traffic from the source port (including, if desired, 
errored frames) is sent to the destination port, normal switching 
is still performed for all frames on the source port.