Cabletron Systems 6H129-08 사용자 설명서

Press the SPACE bar to step to the appropriate operation mode, 
(802.1D SWITCHING, 802.1Q SWITCHING, or SECURE FAST 
VLAN).

Use the arrow keys to highlight the SAVE command at the bottom of 
the screen and press ENTER. The warning screen shown back in 

Use the arrow keys to highlight the YES command and press ENTER. 
The changes are saved and the module reboots.

To set the Management Mode, perform the following steps:

Use the arrow keys to highlight the Management Mode field:

Use the SPACE bar to toggle the options (DISTRIBUTED or 
STAND ALONE) until the desired mode displays.

Upon saving the new operational mode, the module will reboot.

If the 6H12X-08 has been set to 802.1Q SWITCHING, refer to 
your 

Port Based VLAN User’s Guide to configure the devices 

for this type of operation.

If the 6H12X-08 has been set to SECURE FAST VLAN, refer to 
your SecureFast documentation set to configure the device for 
this type of operation.

Upon saving the new Management Mode, the module will 
reboot.

If the module will be set to STAND ALONE, ensure the 
following procedures have been completed first:

The module has been assigned a unique IP address.

The module has been assigned SNMP community names from 
the module SNMP Community Names screen (

). 

In STAND ALONE management mode, the module does not 
use the community names of the 6C105 chassis.