Lantronix SLSLP400PS201 사용자 설명서
Spider™ and SpiderDuo® KVM-over-IP Device User Guide
104
11: Command Reference
This chapter lists and describes the command line interface (CLI) syntax and contains the
following sections:
following sections:
Command Syntax
Commands have the following format: <action> <category> <parameter(s)> where <action> is set,
show, connect, diag, admin, or logout. <category> is a group of related parameters you want to
configure or view. Examples are device, group, user, and network. <parameter(s)> is one or more
name-value pairs in one of the following formats:
show, connect, diag, admin, or logout. <category> is a group of related parameters you want to
configure or view. Examples are device, group, user, and network. <parameter(s)> is one or more
name-value pairs in one of the following formats:
<parameter name> <aa | bb>—Specify one of the values (aa or bb) separated by a vertical
line ( | ). The values are all lowercase and must be entered exactly as shown. Bold indicates a
default value.
line ( | ). The values are all lowercase and must be entered exactly as shown. Bold indicates a
default value.
<parameter name> <Value>—Specify an appropriate value, for example, a device group
name. This User Guide shows parameter values in mixed case to indicate they are case
sensitive. For example, if you saved a device group name in mixed case, you must enter it in
mixed case; if you saved it in lowercase, you must enter it in lowercase.
name. This User Guide shows parameter values in mixed case to indicate they are case
sensitive. For example, if you saved a device group name in mixed case, you must enter it in
mixed case; if you saved it in lowercase, you must enter it in lowercase.
Square brackets [ ]—Indicate optional parameters.
Table 11-1 Action and Category
Action
Category
set
datetime | device | group | history | network | oem | power | security | serial | sshkey | user
show
datetime | device | group | history | network | oem | power | security | serial | sshkey |
sysconfig | user
sysconfig | user
connect
serial | wakeonlan
diag
ping | ping6