Lantronix SW 94000 사용자 설명서

XPress-Pro SW 94000 User Guide  

20 

A host system is running a terminal emulation program that supports the Kermit file 
transfer protocol.  

The host system’s hard drive has the required binary file that will be downloaded to the 
Xpress-Pro SW 94000 switch. 

This option lets you modify any configurable parameter in the switch’s flash ROM before 
the Xpress-Pro SW 94000 switch system boots.  

This option is to download the manufacturer’s diagnostics. Refer to Download Runtime 
Software for download requirements. 

When the file transfer is completed, the target system jumps to the entry point of the 
diagnostic program and starts executing the diagnostic code. The Main Menu of the 
diagnostic program appears where you can initiate tests or obtain system information. 
Note that user intervention is not required when a test runs, unless an error occurs. If an 
error occurs during testing, you are given the choice of continuing the diagnostics or skip 
the error. 

It is necessary to follow the cable specifications below when connecting the Xpress-Pro 
SW 94000 switch to your network. Use appropriate cables that meet your speed and 
cabling requirements. 

10BaseT RJ-45 10/20 

Mbps 2-pair UTP/STP Cat. 3, 4, 5  100 m 

100BaseTX 

RJ-45 

100/200 Mbps 

2-pair UTP/STP Cat. 5 

100 m 

1000BaseT 

RJ-45 

2000 Mbps 

4-pair UTP/STP Cat. 5 

100 m 

100BaseFX 

ST, SC 

100/200 Mbps 

MMF (50 or 62.5µm) 

2 km 

100BaseFX 

ST, SC 

100/200 Mbps 

SMF (9 or 10µm) 

15, 40, or 75 km 

1000BaseSX  SC 

2000 Mbps 

MMF (50 or 62.5µm) 

550 m 

1000BaseLX  SC 

2000 Mbps 

SMF (9 or 10µm) 

10, 20, or 60 km