Juniper Networks EX3200 사용자 설명서

3.

Follow instructions in “Connecting Earth Ground to an EX Series Switch” on
page 141.

4.

Follow instructions for connecting power as appropriate for your site:

■

■

5.

Perform initial configuration of the switch by following instructions in “Connecting
and Configuring an EX Series Switch (CLI Procedure)” on page 161 or “Connecting
and Configuring an EX Series Switch (J-Web Procedure)” on page 163.

6.

Set the switch’s management options by following the appropriate instructions:

■

■

Related Topics

■

■

■

Unpacking an EX3200 or EX4200 Switch

The EX3200 and EX4200 switch chassis is a rigid sheet-metal structure that houses
the hardware components. EX3200 and EX4200 switches are shipped in a cardboard
carton, secured with foam packing material. The carton also contains an accessory
box and quick start instructions.

CAUTION: EX3200 and EX4200 switches are maximally protected inside the shipping
carton. Do not unpack the switches until you are ready to begin installation.

To unpack an EX3200 or EX4200 switch (see Figure 36 on page 115):

1.

Move the shipping carton to a staging area as close to the installation site as
possible, but where you have enough room to remove the system components.

2.

Position the carton so that the arrows are pointing up.

3.

Open the top flaps on the shipping carton.

4.

Remove the accessory box and verify the contents against the parts inventory
on the label attached to the carton.

5.

Pull out the packing material holding the switch in place.

114

■

Unpacking an EX3200 or EX4200 Switch

Complete Hardware Guide for EX3200 and EX4200 Ethernet Switches