Juniper Networks EX3200 사용자 설명서

Figure 37: Attaching Rubber Feet to an EX3200 or EX4200 Switch Chassis

Related Topics

■

■

■

■

■

Mounting an EX3200 or EX4200 Switch on Two Posts in a Rack or Cabinet

You can mount an EX3200 or EX4200 switch on two posts of a 19-in. rack or cabinet
by using the mounting brackets provided with the switch. (The remainder of this
topic uses “rack” to mean “rack or cabinet.”)

You can mount the switch on four posts of a four-post rack by using the mounting
brackets provided with the separately orderable four-post rack-mount kit. See
“Mounting an EX3200 or EX4200 Switch on Four Posts in a Rack or Cabinet” on
page 121.

NOTE: If you need to mount the switch in a recessed position on either a two-post
rack or a four-post rack, you can use the 2-in.-recess front brackets provided in the
separately orderable four-post rack-mount kit.

Before mounting an EX3200 or EX4200 switch on two posts in a rack:

■

Verify that the site meets the requirements described in “Site Preparation
Checklist for EX3200 and EX4200 Switches” on page 81.

■

Place the rack in its permanent location, allowing adequate clearance for airflow
and maintenance, and secure it to the building structure.

118

■

Mounting an EX3200 or EX4200 Switch on Two Posts in a Rack or Cabinet

Complete Hardware Guide for EX3200 and EX4200 Ethernet Switches