Juniper Networks EX2200 사용자 설명서
To mount the switch on four posts in a rack:
1.
Attach the front brackets (either the flush or the 2-in.-recess brackets) to the side-rail
brackets using six 4-40 flat-head Phillips mounting screws. See Figure 17 on page 59.
brackets using six 4-40 flat-head Phillips mounting screws. See Figure 17 on page 59.
Figure 17: Attaching the Front Bracket to the Side-Rail Bracket
2.
Place the switch on a flat, stable surface.
3.
Align the side-rail brackets along the side panels of the switch chassis. Align the two
holes in the rear of the side-rail brackets with the two holes on the rear of the side
panel.
holes in the rear of the side-rail brackets with the two holes on the rear of the side
panel.
4.
Insert 4x6-mm Phillips flat-head mounting screws into the two aligned holes and
tighten the screws. Ensure that the two holes in the rear of the side-rail brackets are
aligned with the remaining two holes in the side panel. See Figure 18 on page 59.
tighten the screws. Ensure that the two holes in the rear of the side-rail brackets are
aligned with the remaining two holes in the side panel. See Figure 18 on page 59.
Figure 18: Attaching the Side-Rail Bracket to the Switch Chassis
g027017
5.
Insert the 4x6-mm Phillips flat-head mounting screws into the remaining two holes
in the side-rail brackets and tighten the screws.
in the side-rail brackets and tighten the screws.
6.
Have one person grasp both sides of the switch, lift the switch, and position it in the
rack, aligning the side-rail bracket holes with the threaded holes in the front post of
the rack. Align the bottom hole in both the mounting brackets with a hole in each rack
rail, making sure the chassis is level. See Figure 19 on page 60.
rack, aligning the side-rail bracket holes with the threaded holes in the front post of
the rack. Align the bottom hole in both the mounting brackets with a hole in each rack
rail, making sure the chassis is level. See Figure 19 on page 60.
59
Copyright © 2010, Juniper Networks, Inc.
Chapter 8: Installing the Switch