Juniper Networks EX4200 사용자 설명서
Table 32: Inventory of Components Provided with an EX3200 or EX4200 Switch (continued)
Quantity
Component
1
RJ-45 cable and RJ-45 to DB-9 serial port adapter
1
Virtual Chassis cable (for an EX4200 switch)
2
Virtual Chassis cable connector retainers (for an EX4200 switch)
24
Dust covers for ports (for an EX4200-24F switch)
Related Topics
■
■
■
■
Mounting an EX3200 or EX4200 Switch
You can mount an EX3200 or EX4200 switch:
■
On two posts in a 19-in. rack or cabinet by using the mounting brackets provided
with the switch.
with the switch.
■
On four posts in a 19-in. rack or cabinet by using the separately orderable
four-post rack-mount kit.
four-post rack-mount kit.
■
In a position recessed 2 in. from the front of a 19-in. rack or cabinet by using
the 2-in.-recess front brackets in the separately orderable four-post rack-mount
kit. You can mount the switch in this recessed position on two-post or four-post
racks and cabinets.
the 2-in.-recess front brackets in the separately orderable four-post rack-mount
kit. You can mount the switch in this recessed position on two-post or four-post
racks and cabinets.
■
On a desk or other level surface by using rubber feet. The switch is shipped with
four rubber feet to be used to stabilize the chassis on a desk or other level surface.
four rubber feet to be used to stabilize the chassis on a desk or other level surface.
■
On a wall by using the separately orderable wall-mount kit.
The holes in the mounting brackets are placed at 1 U (1.75 in. or 4.45 cm.) apart so
that the switch can be mounted in any rack or cabinet that provides holes spaced at
that distance.
that the switch can be mounted in any rack or cabinet that provides holes spaced at
that distance.
Related Topics
■
■
■
■
116
■
Mounting an EX3200 or EX4200 Switch
Complete Hardware Guide for EX3200 and EX4200 Ethernet Switches