Juniper Networks EX4200 사용자 설명서

Figure 26: XFP Uplink Module

g020108

Link/Activity
LED

Status LED

Port 0

Port 1

XFP uplink modules are shipped with a dust cover preinstalled in one port.

The XFP uplink module requires JUNOS Software for EX Series switches, Release 9.0
or later.

Related Topics

■

Network Port LEDs in EX3200 and EX4200 Switches on page 20

■

Uplink Modules Connector Pinout Information for EX3200 and EX4200 Switches
on page 67

■

Optical Interface Support in EX3200 and EX4200 Switches on page 43

■

Example: Configuring Aggregated Ethernet High-Speed Uplinks Between a Virtual
Chassis Access Switch and a Virtual Chassis Distribution Switch

■

Example: Configuring Aggregated Ethernet High-Speed Uplinks with LACP
Between a Virtual Chassis Access Switch and a Virtual Chassis Distribution Switch

■

Installing an Uplink Module in an EX3200 or EX4200 Switch on page 133

■

Troubleshooting Uplink Module Installation or Replacement on EX3200 and
EX4200 Switches on page 192

Uplink Modules in EX3200 and EX4200 Switches

■

Chapter 2: Component Descriptions