Cisco Systems 3560 사용자 설명서
42-11
Catalyst 3560 Switch Software Configuration Guide
OL-8553-06
Chapter 42 Configuring Enhanced Object Tracking
Configuring Enhanced Object Tracking Features
Beginning in privileged EXEC mode, follow these steps to configure a primary interface for DHCP:
Configuring a Cisco IP SLAs Monitoring Agent and Track Object
Beginning in privileged EXEC mode, follow these steps to configure network monitoring with Cisco IP
SLAs:
SLAs:
Step 3
description string
Add a description to the interface.
Step 4
ip address ip-address mask [secondary]
Set the primary or secondary IP address for the interface.
Step 5
exit
Return to global configuration mode.
Command
Purpose
Command
Purpose
Step 1
configure terminal
Enter global configuration mode.
Step 2
interface interface-id
Select a primary or secondary interface and enter interface
configuration mode.
configuration mode.
Step 3
description string
Add a description to the interface.
Step 4
ip dhcp client route track number
Configure the DCHP client to associate any added routes with the
specified track number. Valid numbers are from 1 to 500.
specified track number. Valid numbers are from 1 to 500.
Step 5
ip address dhcp
Acquire an IP address on an Ethernet interface from DHCP.
Step 6
exit
Return to global configuration mode.
Step 1
configure terminal
Enter global configuration mode.
Step 2
ip sla operation-number
Begin configuring a Cisco IP SLAs operation and enter IP SLA
configuration mode.
configuration mode.
Step 3
icmp-echo {destination-ip-address |
destination hostname [source- ipaddr
{ip-address | hostname source-interface
interface-id]
destination hostname [source- ipaddr
{ip-address | hostname source-interface
interface-id]
Configure a Cisco IP SLAs end-to-end ICMP echo response time
operation and enter IP SLAs ICMP echo configuration mode.
operation and enter IP SLAs ICMP echo configuration mode.
Step 4
timeout milliseconds
Set the amount of time for which the operation waits for a response
from its request packet.
from its request packet.
Step 5
frequency seconds
Set the rate at which the operation is sent into the network.
Step 6
threshold milliseconds
Set the rising threshold (hysteresis) that generates a reaction event
and stores history information for the operation.
and stores history information for the operation.
Step 7
exit
Exit IP SLAs ICMP echo configuration mode.
Step 8
ip sla schedule operation-number [life
{forever | seconds}] start-time time |
pending | now | after time] [ageout
seconds] [recurring]
{forever | seconds}] start-time time |
pending | now | after time] [ageout
seconds] [recurring]
Configure the scheduling parameters for a single IP SLAs operation.
Step 9{
track object-number rtr operation-number
{state | reachability}
{state | reachability}
Track the state of a Cisco IOS IP SLAs operation and enter tracking
configuration mode.
configuration mode.
Step 10
end
Return to privileged EXEC mode.