Cisco Systems 3560 사용자 설명서

Beginning in privileged EXEC mode, follow these steps to configure static traffic forwarding with SSM 
mapping:

Use the privileged EXEC commands in 

 to monitor SSM mapping.

Go to this URL to see SSM mapping monitoring examples:

configure terminal

Enter global configuration mode.

interface type number

Select an interface on which to statically forward traffic for a multicast 
group using SSM mapping, and enter interface configuration mode.

Static forwarding of traffic with SSM mapping works with 
either DNS-based SSM mapping or statically configured SSM 
mapping.

ip igmp static-group group-address 
source ssm-map

Configure SSM mapping to statically forward a (S, G) channel from the 
interface.

Use this command if you want to statically forward SSM traffic for 
certain groups. Use DNS-based SSM mapping to determine the source 
addresses of the channels.

Verify your entries.

(Optional) Save your entries in the configuration file.

show ip igmp ssm-mapping

Display information about SSM mapping.

show ip igmp ssm-mapping 
group-address

Display the sources that SSM mapping uses for a particular 
group.

show ip igmp groups [group-name | 
group-address | interface-type 
interface-number] [detail]

Display the multicast groups with receivers that are directly 
connected to the router and that were learned through IGMP.

show host

Display the default domain name, the style of name lookup 
service, a list of name server hosts, and the cached list of 
hostnames and addresses.

debug ip igmp group-address

Display the IGMP packets received and sent and IGMP 
host-related events.