Cisco Systems 3560 사용자 설명서

Multiple switches connected in the same LAN and in the same EnergyWise domain.

The domain configuration includes

UDP default port (43440) 

Gigabit Ethernet port 0/23 on Switch 2 with a connected Catalyst PoE switch. 

On Switch 1, configure the domain:

Switch(config): energywise domain cisco secret 0 cisco protocol udp port 43440 interface 

On Switch 1, verify that the EnergyWise protocols discovered the neighbors:

Switch# show energywise neighbors

Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge

                  S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone

Id   Neighbor Name            Ip:Port                 Prot   Capability

--   -------------            -------                 ----   ----------

4    Switch-2                 192.168.20.2:43440      udp    S I

Switch 1 and Switch 2 are in a disjointed domain. Neighbors might not be discovered automatically. 

Switch 1

Switch 2

Catalyst PoE switch

Port 24

Port 1

Port 23

Port 24

205694