Cisco Systems 3560 사용자 설명서
9-2
Catalyst 3560 Switch Software Configuration Guide
OL-8553-06
Chapter 9 Configuring Switch-Based Authentication
Protecting Access to Privileged EXEC Commands
•
If you want to use username and password pairs, but you want to store them centrally on a server
instead of locally, you can store them in a database on a security server. Multiple networking devices
can then use the same database to obtain user authentication (and, if necessary, authorization)
information. For more information, see the
instead of locally, you can store them in a database on a security server. Multiple networking devices
can then use the same database to obtain user authentication (and, if necessary, authorization)
information. For more information, see the
.
•
You can also enable the login enhancements feature, which logs both failed and unsuccessful login
attempts. Login enhancements can also be configured to block future login attempts after a set
number of unsuccessful attempts are made. For more information, see the Cisco IOS Login
Enhancements documentation at this URL:
attempts. Login enhancements can also be configured to block future login attempts after a set
number of unsuccessful attempts are made. For more information, see the Cisco IOS Login
Enhancements documentation at this URL:
http://www.cisco.com/en/US/docs/ios/12_3t/12_3t4/feature/guide/gt_login.html
Protecting Access to Privileged EXEC Commands
A simple way of providing terminal access control in your network is to use passwords and assign
privilege levels. Password protection restricts access to a network or network device. Privilege levels
define what commands users can enter after they have logged into a network device.
privilege levels. Password protection restricts access to a network or network device. Privilege levels
define what commands users can enter after they have logged into a network device.
Note
For complete syntax and usage information for the commands used in this section, see the Cisco IOS
Security Command Reference, Release 12.2 from the Cisco.com page under Documentation > Cisco
IOS Software > 12.2 Mainline > Command References.
Security Command Reference, Release 12.2 from the Cisco.com page under Documentation > Cisco
IOS Software > 12.2 Mainline > Command References.
These sections contain this configuration information:
•
•
•
•
•
•
•
Default Password and Privilege Level Configuration
shows the default password and privilege level configuration.
Table 9-1
Default Password and Privilege Levels
Feature
Default Setting
Enable password and privilege level
No password is defined. The default is level 15 (privileged EXEC level).
The password is not encrypted in the configuration file.
The password is not encrypted in the configuration file.
Enable secret password and privilege level
No password is defined. The default is level 15 (privileged EXEC level).
The password is encrypted before it is written to the configuration file.
The password is encrypted before it is written to the configuration file.
Line password
No password is defined.