Cisco Systems 3560 사용자 설명서
12-2
Catalyst 3560 Switch Software Configuration Guide
OL-8553-06
Chapter 12 Configuring Auto Smartports Macros
Configuring Auto Smartports
Configuring Auto Smartports
•
•
•
•
•
•
Default Auto Smartports Configuration
•
Auto Smartports is disabled.
•
Cisco IOS shell is enabled.
shows the Auto Smartports built-in macros that are embedded in the switch software.
Table 12-1
Auto Smartports Built-in Macros
Macro Name
Description
CISCO_PHONE_AUTO_
SMARTPORT
Use this macro to apply the IP phone macro for Cisco IP phones. It enables QoS, port
security, Address Resolution Protocol inspection (dynamic ARP inspection), IP source
guard, DHCP snooping, storm control and spanning-tree protection on the port.
security, Address Resolution Protocol inspection (dynamic ARP inspection), IP source
guard, DHCP snooping, storm control and spanning-tree protection on the port.
CISCO_SWITCH_AUTO_
SMARTPORT
Use this macro to apply the switch macro for Cisco switches. It enables trunking on the
port.
port.
CISCO_ROUTER_AUTO_
SMARTPORT
Use this macro to apply the router macro for Cisco routers. It enables QoS, trunking, and
spanning-tree protection on the port.
spanning-tree protection on the port.
CISCO_AP_AUTO_
SMARTPORT
Use this macro to apply the wireless access point (AP) macro for Cisco APs. It enables
support for an autonomous wireless access point and QoS on the port.
support for an autonomous wireless access point and QoS on the port.
CISCO_LWAP_AUTO_
SMARTPORT
Use this macro to apply the light-weight wireless access point macro for Cisco light-weight
wireless APs. It enables QoS, port security, dynamic ARP inspection, IP source guard,
DHCP snooping, storm control, and spanning-tree protection on the port.
wireless APs. It enables QoS, port security, dynamic ARP inspection, IP source guard,
DHCP snooping, storm control, and spanning-tree protection on the port.
CISCO_DOT1X_DESKTOP_
AUTO_SMARTPORT
Use this macro to apply the desktop macro for IEEE 802.1x-authenticated devices. It
enables basic desktop configuration, including security and spanning-tree protection.
enables basic desktop configuration, including security and spanning-tree protection.
CISCO_DOT1X_EASY_AUTO
_SMARTPORT
_SMARTPORT
Use this macro to apply the desktop macro for IEEE 802.1x-authenticated desktop devices.
It provides 802.1x, MAB, guest-VLAN, authentication-fail-VLAN support and reduces the
802.1x timeout to 3 seconds.
It provides 802.1x, MAB, guest-VLAN, authentication-fail-VLAN support and reduces the
802.1x timeout to 3 seconds.
CISCO_DOT1X_MAB_
GUEST_AUTO_SMARTPORT
Use this macro to apply the desktop macro for 802.1x-, MAB-, and
guest-VLAN-authenticated devices.
guest-VLAN-authenticated devices.
CISCO_DOT1X_MAB_
TIMEOUT_AUTO_
SMARTPORT
Use this macro to apply the desktop macro for 802.1x-, MAB-, and
guest-VLAN-authenticated devices configured with an aggressive timeout.
guest-VLAN-authenticated devices configured with an aggressive timeout.
CISCO_DOT1X_AUTH_
FAIL_AUTO_SMARTPORT
Use this macro to apply the desktop macro for 802.1x-, MAB-, and
authentication-fail-VLAN-authenticated devices.
authentication-fail-VLAN-authenticated devices.
CISCO_DOT1X_CRITICAL_
AUTO_SMARTPORT
Use this macro to apply the desktop macro for 802.1x-, MAB-, and
critical-VLAN-authenticated devices.
critical-VLAN-authenticated devices.