Cisco Systems 3560 사용자 설명서
14-6
Catalyst 3560 Switch Software Configuration Guide
OL-8553-06
Chapter 14 Configuring Private VLANs
Configuring Private VLANs
Tasks for Configuring Private VLANs
To configure a private VLAN, follow these steps:
Step 1
Set VTP mode to transparent.
Step 2
Create the primary and secondary VLANs and associate them. See the
Note
If the VLAN is not created already, the private-VLAN configuration process creates it.
Step 3
Configure interfaces to be isolated or community host ports, and assign VLAN membership to the host
port. See the
port. See the
.
Step 4
Configure interfaces as promiscuous ports, and map the promiscuous ports to the primary-secondary
VLAN pair. See the
VLAN pair. See the
Step 5
If inter-VLAN routing will be used, configure the primary SVI, and map secondary VLANs to the
primary. See the
primary. See the
Step 6
Verify private-VLAN configuration.
Default Private-VLAN Configuration
No private VLANs are configured.
Private-VLAN Configuration Guidelines
Guidelines for configuring private VLANs fall into these categories:
•
•
•
Secondary and Primary VLAN Configuration
Follow these guidelines when configuring private VLANs:
•
Set VTP to transparent mode. After you configure a private VLAN, you should not change the VTP
mode to client or server. For information about VTP, see
mode to client or server. For information about VTP, see
•
You must use VLAN configuration (config-vlan) mode to configure private VLANs. You cannot
configure private VLANs in VLAN database configuration mode. For more information about
VLAN configuration, see
configure private VLANs in VLAN database configuration mode. For more information about
VLAN configuration, see
.