Cisco Systems 3560 사용자 설명서

26-7

Catalyst 3560 Switch Software Configuration Guide

OL-8553-06

Chapter 26 Configuring LLDP, LLDP-MED, and Wired Location Service

Configuring LLDP, LLDP-MED, and Wired Location Service

Beginning in privileged EXEC mode, follow these steps to enable a TLV on an interface:

This example shows how to enable a TLV on an interface:

Switch# configure terminal

Switch(config)# interface interface_id

Switch(config-if)# lldp med-tlv-select inventory-management

Switch(config-if)# end

Configuring Network-Policy TLV

Beginning in privileged EXEC mode, follow these steps to create a network-policy profile, configure the
policy attributes, and apply it to an interface.

network-policy

LLDP-MED network policy TLV

power-management

LLDP-MED power management TLV

Table 26-2

LLDP-MED TLVs

LLDP-MED TLV

Description

Command

Purpose

Step 1

configure terminal

Enter global configuration mode.

Step 2

interface interface-id

Specify the interface on which you are configuring an LLDP-MED
TLV, and enter interface configuration mode.

Step 3

lldp med-tlv-select tlv

Specify the TLV to enable.

Step 4

end

Return to privileged EXEC mode.

Step 5

copy running-config startup-config

(Optional) Save your entries in the configuration file.