Cisco Systems 3560 사용자 설명서

Time Domain Reflector (TDR) to diagnose and resolve cabling problems on 10/100/1000 copper 
Ethernet ports

SFP module diagnostic management interface to monitor physical or operational status of an SFP 
module

Generic online diagnostics to test hardware functionality of the supervisor engine, modules, and 
switch while the switch is connected to a live network.

Enhanced object tracking for HSRP.

Digital optical monitoring (DOM) to check status of X2 small form-factor pluggable (SFP) modules

The switch is designed for plug-and-play operation, requiring only that you assign basic IP information 
to the switch and connect it to the other devices in your network. If you have specific network needs, 
you can change the interface-specific and system-wide settings.

For information about assigning an IP address by using the browser-based Express Setup program, see 
the getting started guide. For information about assigning an IP address by using the CLI-based setup 
program, see the hardware installation guide.

If you do not configure the switch at all, the switch operates with these default settings:

Default switch IP address, subnet mask, and default gateway is 0.0.0.0. For more information, see 

 and 

Default domain name is not configured. For more information, see 

DHCP client is enabled, the DHCP server is enabled (only if the device acting as a DHCP server is 
configured and is enabled), and the DHCP relay agent is enabled (only if the device is acting as a 
DHCP relay agent is configured and is enabled). For more information, see 

Switch cluster is disabled. For more information about switch clusters, see 

 and the Getting Started with Cisco Network Assistant, available on Cisco.com.

No passwords are defined. For more information, see 

System name and prompt is Switch. For more information, see 

NTP is enabled. For more information, see 

DNS is enabled. For more information, see 

TACACS+ is disabled. For more information, see 

RADIUS is disabled. For more information, see 

The standard HTTP server and Secure Socket Layer (SSL) HTTPS server are both enabled. For more 
information, see