Cisco Systems 3560 사용자 설명서

To return to the default map, use the no mls qos dscp-mutation dscp-mutation-name global 
configuration command.

This example shows how to define the DSCP-to-DSCP-mutation map. All the entries that are not 
explicitly configured are not modified (remains as specified in the null map):

Switch(config)# mls qos map dscp-mutation mutation1 1 2 3 4 5 6 7 to 0

Switch(config)# mls qos map dscp-mutation mutation1 8 9 10 11 12 13 to 10

Switch(config)# mls qos map dscp-mutation mutation1 20 21 22 to 20

Switch(config)# mls qos map dscp-mutation mutation1 30 31 32 33 34 to 30

Switch(config)# interface gigabitethernet0/1

Switch(config-if)# mls qos trust dscp

Switch(config-if)# mls qos dscp-mutation mutation1

Switch(config-if)# end

Switch# show mls qos maps dscp-mutation mutation1

Dscp-dscp mutation map:

   mutation1:

     d1 :  d2 0  1  2  3  4  5  6  7  8  9

     ---------------------------------------

      0 :    00 00 00 00 00 00 00 00 10 10

      1 :    10 10 10 10 14 15 16 17 18 19

      2 :    20 20 20 23 24 25 26 27 28 29

      3 :    30 30 30 30 30 35 36 37 38 39

      4 :    40 41 42 43 44 45 46 47 48 49

      5 :    50 51 52 53 54 55 56 57 58 59

      6 :    60 61 62 63 

In the above DSCP-to-DSCP-mutation map, the mutated values are shown in the body of the matrix. The 
d1 column specifies the most-significant digit of the original DSCP; the d2 row specifies the 
least-significant digit of the original DSCP. The intersection of the d1 and d2 values provides the 
mutated value. For example, a DSCP value of 12 corresponds to a mutated value of 10.

Depending on the complexity of your network and your QoS solution, you might need to perform all of 
the tasks in the next sections. You will need to make decisions about these characteristics:

Which packets are assigned (by DSCP or CoS value) to each queue?

What drop percentage thresholds apply to each queue, and which CoS or DSCP values map to each 
threshold?

How much of the available buffer space is allocated between the queues?

How much of the available bandwidth is allocated between the queues?

Is there traffic (such as voice) that should be given high priority?

These sections contain this configuration information:

(optional)

 (optional)

 (optional)

 (optional)