Cisco Systems 3560 사용자 설명서

To remove the port-channel, use the no interface port-channel port-channel-number global 
configuration command.

This example shows how to create the logical port channel 5 and assign 172.10.20.10 as its IP address:

Switch# configure terminal 

Switch(config)# interface port-channel 5

Switch(config-if)# no switchport

Switch(config-if)# ip address 172.10.20.10 255.255.255.0

Switch(config-if)# end 

Beginning in privileged EXEC mode, follow these steps to assign an Ethernet port to a Layer 3 
EtherChannel. This procedure is required.

(Optional) Save your entries in the configuration file.

Assign an Ethernet port to the Layer 3 EtherChannel. For 
more information, see the 

Enter global configuration mode.

interface interface-id

Specify a physical port, and enter interface configuration mode.

Valid interfaces include physical ports.

For a PAgP EtherChannel, you can configure up to eight ports of 
the same type and speed for the same group.

For a LACP EtherChannel, you can configure up to 16 Ethernet 
ports of the same type. Up to eight ports can be active, and up to 
eight ports can be in standby mode.

Ensure that there is no IP address assigned to the physical port.

no switchport

Put the port into Layer 3 mode.