Cisco Systems 3560 사용자 설명서
35-20
Catalyst 3560 Switch Software Configuration Guide
OL-8553-06
Chapter 35 Configuring EtherChannels and Link-State Tracking
Displaying EtherChannel, PAgP, and LACP Status
Beginning in privileged EXEC mode, follow these steps to configure the LACP port priority. This
procedure is optional.
procedure is optional.
To return the LACP port priority to the default value, use the no lacp port-priority interface
configuration command.
configuration command.
Displaying EtherChannel, PAgP, and LACP Status
To display EtherChannel, PAgP, and LACP status information, use the privileged EXEC commands
described in
described in
:
You can clear PAgP channel-group information and traffic counters by using the clear pagp
{channel-group-number counters | counters} privileged EXEC command.
{channel-group-number counters | counters} privileged EXEC command.
You can clear LACP channel-group information and traffic counters by using the clear lacp
{channel-group-number counters | counters} privileged EXEC command.
{channel-group-number counters | counters} privileged EXEC command.
For detailed information about the fields in the displays, see the command reference for this release.
Command
Purpose
Step 1
configure terminal
Enter global configuration mode.
Step 2
interface interface-id
Specify the port to be configured, and enter interface configuration
mode.
mode.
Step 3
lacp port-priority priority
Configure the LACP port priority.
For priority, the range is 1 to 65535. The default is 32768. The lower the
value, the more likely that the port will be used for LACP transmission.
value, the more likely that the port will be used for LACP transmission.
Step 4
end
Return to privileged EXEC mode.
Step 5
show running-config
or
show lacp [channel-group-number]
internal
internal
Verify your entries.
Step 6
copy running-config startup-config
(Optional) Save your entries in the configuration file.
Table 35-4
Commands for Displaying EtherChannel, PAgP, and LACP Status
Command
Description
show etherchannel [channel-group-number {detail |
port | port-channel | protocol | summary}] {detail |
load-balance | port | port-channel | protocol |
summary}
port | port-channel | protocol | summary}] {detail |
load-balance | port | port-channel | protocol |
summary}
Displays EtherChannel information in a brief, detailed, and
one-line summary form. Also displays the load-balance or
frame-distribution scheme, port, port-channel, and protocol
information.
one-line summary form. Also displays the load-balance or
frame-distribution scheme, port, port-channel, and protocol
information.
show pagp [channel-group-number] {counters |
internal | neighbor}
internal | neighbor}
Displays PAgP information such as traffic information, the
internal PAgP configuration, and neighbor information.
internal PAgP configuration, and neighbor information.
show pagp [channel-group-number] dual-active
Displays the dual-active detection status.
show lacp [channel-group-number] {counters |
internal | neighbor}
internal | neighbor}
Displays LACP information such as traffic information, the
internal LACP configuration, and neighbor information.
internal LACP configuration, and neighbor information.