Cisco Systems 3560 사용자 설명서

Beginning in privileged EXEC mode, follow these steps to enable HSRP version 2 on a Layer 3 interface.

Beginning in privileged EXEC mode, follow these steps to create or enable HSRP for IPv6 on a Layer 3 
interface.

Enter global configuration mode.

interface interface-id

Enter interface configuration mode, and enter the 
Layer 3 interface on which you want to specify the 
standby version.

standby version {1 | 2}

Enter 2 to change the HSRP version. The default is 1.

Return to privileged EXEC mode.

Verify the configuration.

(Optional) Save your entries in the configuration file.

Enter global configuration mode.

interface interface-id

Enter interface configuration mode, and enter the Layer 3 
interface on which you want to enable HSRP for IPv6.

standby [group-number] ipv6 {link-local-address 
| autoconfig}

Create (or enable) the HSRP for IPv6 group.

(Optional) group-number—The group number on the 
interface for which HSRP is being enabled. The range is 0 
to 4095. The default is 0. If there is only one HSRP group, 
you do not need to enter a group number.

Enter the link-local address of the Hot Standby router 
interface, or enable the link-local address to be generated 
automatically from the link-local prefix and a modified 
EUI-64 format interface identifier, where the EUI-64 
interface identifier is created from the relevant HSRP 
virtual MAC address.