Cisco Systems SPS224G4 사용자 설명서

CLI Command Modes

SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide

19

This is the initial mode after system login (except for users who are defined as 
privileged users; refer to “

Privileged EXEC Mode

”). User EXEC mode is used for 

tasks that do not change the configuration, such as performing basic tests and 
listing system information.

The user-level prompt consists of the Switch host name followed by the angle 
bracket >:

The default host name is Console unless it is changed via the hostname command 
in Global Configuration mode. 

To access the next higher mode (Privileged EXEC mode), use the enable 
command and enter a password when prompted.

Privileged EXEC mode is password-protected to prevent unauthorized use, as 
many of its commands set operating system parameters. The password is not 
displayed on the screen and is case-sensitive.

Privileged users start in Privileged EXEC mode. To enter this mode from User 
EXEC mode, follow these steps:

At the prompt enter the enable command and press Enter. A password prompt is 
displayed.

Enter the password and press Enter. (For security purposes, each character in the 
password is replaced by *). The Privileged EXEC mode prompt, consisting of the 
Switch host name followed by, is displayed.

To return from the Privileged EXEC mode to the User EXEC mode, use the disable 
command. 

The following example illustrates how to access Privileged EXEC mode and then 
return to User EXEC mode: