DELL 9.8(0.0) 사용자 설명서
Version
Description
9.7(0.0)
Introduced on the S6000–ON.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
8.1.1.0
Introduced on the E-Series ExaScale.
7.8.1.0
Increase the name string to accept up to 140 characters.
Prior to 7.8.1.0, names were up to 16 characters long.
Prior to 7.8.1.0, names were up to 16 characters long.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
6.2.1.1
Introduced on the E-Series.
ip access-group
Assign an IP access list (IP ACL) to an interface.
Syntax
ip access-group access-list-name {in | out} [implicit-permit]
[vlan vlan-id] [vrf vrf-name]
To delete an IP access-group configuration, use the no ip access-group
access-list-name {in | out} [implicit-permit] [vlan vlan-id]
[vrf vrf-name] command.
[vlan vlan-id] [vrf vrf-name]
To delete an IP access-group configuration, use the no ip access-group
access-list-name {in | out} [implicit-permit] [vlan vlan-id]
[vrf vrf-name] command.
Parameters
access-list-
name
name
Enter the name of a configured access list, up to 140
characters.
characters.
in
Enter the keyword in to apply the ACL to incoming traffic.
out
Enter the keyword out to apply the ACL to outgoing traffic.
implicit-permit
(OPTIONAL) Enter the keyword implicit-permit to
change the default action of the ACL from implicit-deny to
implicit-permit (that is, if the traffic does not match the filters
in the ACL, the traffic is permitted instead of dropped).
change the default action of the ACL from implicit-deny to
implicit-permit (that is, if the traffic does not match the filters
in the ACL, the traffic is permitted instead of dropped).
vlan vlan-id
(OPTIONAL) Enter the keyword vlan then the ID numbers of
the VLANs. The range is from 1 to 4094 (you can use IDs
from 1 to 4094).
the VLANs. The range is from 1 to 4094 (you can use IDs
from 1 to 4094).
vrf vrf-name
(OPTIONAL) Enter the keyword vrf then the ID numbers of
the VRFs. The range is from 1 to 63 (you can use IDs from 1
to 63).
the VRFs. The range is from 1 to 63 (you can use IDs from 1
to 63).
226
Access Control Lists (ACL)